• Moscow +7 (499) 748-02-29
  • Tikhoretsk +7 (86196) 7-15-16

Railway Vehicles

Catenary installation and maintenace vehicle ADM-1.5BM

Specifications

General
wheel gauge, mm 1520
power unit output, kW (hps) 239
engine type Diesel engine Cummins QSM11
gear-box type VOITH 884.5 DIWA
own deck cargo capacity, t 5
maximum speed, km/h 100
crawling speed max., km/h 0-5
max. towing capacity at shunting mode, t 400
passenger capacity, pers. 9
proper weight, t 35
Crane
type of crane articulated jib
load lifting capacity at min. outreach, outriggers deployed, t 8,2
load lifting capacity at max. outreach, outriggers deployed, t 2,79
load hook lifting height, meters from rail top level 11,8
max. load hook outreach, meters from track centre 8,0
min. load hook outreach, meters from track centre 2,7
Drilling equipment
make MBL
min. auger outreach, meters from track centre 3,0
max. auger outreach, meters from track centre 6,0
max. pit depth, m 5,0
max. pit diameter, m 0,8
min. pit diameter, m 0,65
Overall dimensions of the vehicle
length between couplers axis, mm 13170
width, mm 3150
height, mm 5280
wheel base, mm 7000

The vehicle was designed to carry out the following operations:

  • Drilling of pits for installation of catenary masts;
  • Maintenance, installation and dismounting of catenary masts and other elements of catenary system;
  • Transportation of loads on coupled wagons;

  • Delivery of workers to site;

  • Shunting at station yards;

  • Power supply to welding equipment at work site;

  • Power supply to electrical equipment working at 380/220V, 50Hz.;

ADM-1.5BM catenary installation vehicle is fully self-propelled. The control cabin is mounted on the front end of the vehicle frame. The cargo lifting articulated jib is placed on the rear end of the vehicle and serves to perform cargo handling, installation or de-installation of catenary masts. The elements of the auger are transported fixed to the frame deck between the cabin and the crane. The auger is set in the operating mode with the help of the articulated jib.  Cummins Diesel engine is installed under the frame in its middle section.

Torgue is transmitted from hydraulic gear box to the 3-phase alternator and cardan shafts. Torque from cardan shafts is further transmitted to the axle gear boxes of wheel-sets. The air-compressor is driven by belt-drive.

Similar vehicles

    500 Internal Server Error

    Internal Server Error

    The server encountered an internal error or misconfiguration and was unable to complete your request.

    Error has been logged.